IP Address Limit

[KAPITYAN]

I was wondering if possible to restrict Caspio to 4 different incoming IP addresses. The deploy page seems to limit to only 1 address.

Yes, you can use masks, but that does not apply in this case.

Thanks!

[NailDyanC]

Regarding with your concern, you can restrict Caspio to 4 different IP address.

On the DataPages listing, select the desired DataPage and click Deploy. Click Enabled on the Deployment Status. Then, click IP Filtering at the bottom of the Deploy DataPage screen. A new dialog box will appear. Select Deny All/Allow all from the Default Access drop-down to enable or disable access by general IP addresses. Then click, Add Single IP. Then you can add the different IP Addresses.

Please refer to this link for reference: 
https://howto.caspio.com/faq/deployment/block-access-by-ip-address/

[Jess147]

Is there a limit on how many IP addresses are allowed? What is the maximum?

[DefinitelyNot31337]

Hi Jess,

 

You might have not noticed the Add Single IP button. It looks like a link so you might have missed it at first.

 

I was able to add 10 IP Addresses and seems that I can add more. See attached image.

 

Hope this information helps.

 

Regards,

DN31337